SUMA SCALE ACID DECALER - 2.5 Litre D5.2
Acidic cleaner for the removal of limescale. Brightens dull metal surfaces by removing oxide film. Safer in use due to non-corrosive formulation.
Out of Stock - on backorder and will be dispatched once in stock.
For Soaking Application:
Use at a concentration of 50-400ml Suma Scale D5.2 to 1 litre of hot water (5-40%) dependent on the degree of scale.
Fill the item or soak in solution until the scale dissolves.
Scrub if required to remove heavy deposits.
Rinse thoroughly with clean water and allow to dry.
Apply solution of 300-400ml of Suma Scale D5.2 to 1 litre of warm water (30-40%) to surface or equipment, dependant on the degree of scale.
Leave for at least 30 minutes and brush.
Rinse thoroughly with clean water and allow to air dry.
Switch off dosing equipment and fill dishwasher with fresh water.
Add sufficient Suma Scale D5.2 to the water to produce a 10-20% solution (approximately 100-200ml per litre of water).
Circulate solution for 10-15 minutes, drain and inspect. Repeat if required.
Drain and rinse thoroughly, allow to dry leaving door open.
Switch on dosing equipment.